Ultralite HFDL28 Hand/Foot System
The newly released Ultralite model HFDL28 hand/foot system is the most effective and efficient hand-and-foot unit on the market. Because its output is 3 to 6 times the output of any competitor’s product, the treatment times are shorter and effective lamp life is two to four times greater. This will give the user significant cost and maintenance savings. Usually the operating costs are so low compared to competing equipment that the savings in replacement lamps alone will more than pay for the unit itself. Moreover, anecdotal reports suggest that the Ultralite HFDL28NB (UVB narrowband) can clear patients previously thought beyond the ability to be cleared, a finding which has prompted great interest in several research groups to determine experimentally whether this is indeed the case and how accurate the anecdotal reports are.
The new design of the Ultralite HFDL28 was developed from the highly successful HF 1200 series, which has been in doctor’s offices and homes for nearly twenty years. The more compact design gives equivalent intensities using 14 lamps total for each section instead of the previous 12. This results in additional maintenance savings and lower operational costs. As always, the Ultralite hand-and-foot machine irradiates both sides of the hands and feet simultaneously and controls the exposure with a precise dosimetry system.
In addition, the revised structure allows easier routine servicing and the ability to use the same machine for either UVA, UVB broadband, or UVB narrowband therapy. It is recommended that, if more than one type of therapy is to be performed at a location on a regular basis, one system be dedicated to each. However, if the need arises to switch from one type of therapy to another, the steps required to make the changeover are minimal and require no additional parts. This changeover will not necessarily require a field service visit by an Ultralite technician.
Each unit is factory-assembled with an integral stand and casters to allow easy movement when required. The integral stand is far more rigid and sturdy than any other system and permits the complete unit to be positioned close to a wall or office furniture on any of three sides. The design eliminates the possibility of obstructing the cooling air flow path and minimizes floor space requirements. Patients of almost any body structure can be comfortably treated using a standard office chair with height adjustment.
The purpose of the Ultralite unit is to generate light within a desired portion of the spectrum and administer it to the skin surface of a human patient such that it will be as uniform and intense as possible.
The function of the Ultralite unit is to fulfill its purpose of delivering light treatments in a precisely controlled manner, using dosimetry rather than timer controls. This is achieved through a central processor unit that controls all the operating functions within the unit. The process controller allows the operator to select one or more methods of light treatment and to administer them easily and accurately. In addition, the process controller monitors the machine’s operation, maintains data storage registers that allow it to indicate when predetermined or selected safety limits have been reached, and monitors the status of other variables. The user-programmable limits and status registers allow every machine to be set up in a tailored fashion ideally suited to every individual physician. As circumstances change, the user can change the set-up data so that his or her unit is always suited to the particular circumstances.
The HFDL28 Hand/Foot system incorporates many features from the previous design, and includes additional features to make this product even more superior to any other competing product.
· The previous HF1200 system and the new HFDL28 system share a compact ergonomic design.
· Lamps are positioned above and below the hands and feet to irradiate all areas simultaneously.
· Configuration of the lamps and reflector are carefully placed to maximize and optimize exposure.
· The time-tested control system delivers treatments with true dosimeter control for precise and repeatable exposures.
· New structure provides a more compact design with superior rigidity and a more robust framework.
· The slight reconfiguration uses fewer lamps, lowering power consumption and reducing replacement lamp cost. Yet the power levels are much higher than the earlier model and the new system is significantly more efficient than competing equipment.
· Changes to the cabinet position the control at an angle that improves visibility and ease of use by the operator.
· New integral handles ease movement and positioning of the unit. Design improvements provide the need for only one power cord instead of two.
· Wire grid hand supports and UV opaque screen are easily removed for cleaning.
· The system is available in either Narrowband UVB or UVA.
Twenty-eight narrowband UVB or UVA lamps are configured in a top and bottom bank array that allows the top and bottom of the feet and hands to be treated simultaneously. To penetrate thick palms and sole tissue, eight lamps in the lower bank concentrate energy where it is most needed while the six lamps in the top bank operate. Each bank of lamps can be controlled independently. A special solid state electronic ballast powers each lamp. UVB intensities are initially 15-16 mW/cm2. The intensities remain stable after the initial burn-in period (about 15 hours).
Unlike Ultralite's competitors, because we manufacture all of our products in our own factory, we offer support and service for any Hand & Foot unit.
Two-year manufacturer's warranty against defects in materials and workmanship, excluding lamps.
26 inches side to side
24 inches deep
52 inches tall
75 lbs. approximate weight
14 amps—120 V DC
Contact us today to get a quote on the Ultralite HF 2000 Hand/Foot Unit.